Product Introduction
The sawtooth wave jig is one of the modern heavy separation equipment. Because of its large processing capacity, wide selection of particle size range, simple operation and maintenance, it is widely used as a rough selection or selection to sort placer gold, tin, titanium, hematite, Minerals such as iron ore and coal, especially in the field of manganese ore and barite beneficiation, have been widely used.
Traditional jigging machines are mostly driven by circular eccentricity, and their jigging pulsation curves are mostly sinusoidal. Because the rising and falling water flow speeds and action times produced by the diaphragm movement are basically the same, it is not conducive to the loosening of the jig bed and the ore particles.Gravity Separation Machine & Gold Washing.
The specific gravity is stratified, which affects the selection ratio and recovery rate of the equipment. The sawtooth wave jig is an energy-saving reselection equipment developed and improved on the basis of the traditional jigging machine based on the theoretical layering law of the jig bed.
Its jigging pulsation curve is in a saw-tooth shape, making the rising water flow faster than falling Water flow: short rise time and long fall time; overcome sine wave, pulsating curve jig The resulting defects of rising and falling water flow and the same action time enhance the looseness of the bed, alleviate the inhalation effect, fully settle the heavy mineral particles in the mineral, and greatly improve the separation ratio and recovery rate of the equipment. Compared with the sine wave jigging machine, it has improved: Sn 3.01%, W 5.5%, Pb 1.63%, Zn 2.04%;
water consumption is reduced by 30%-40%, floor space is reduced by 1/3, and the stroke can be adjusted. Electromagnetic adjustment motor is used for drag so that the stroke can be adjusted steplessly. Its performance has reached the domestic advanced level and is currently one of the ideal energy-saving reselection equipment.
Technical Parameter
| Model | JT0.57-1 | JT1-1 | JT2-2 | JT3-1 | JT4-2 | JT4-2A | JT5-2 |
| Jigging room | Shape | Trapezoid |
| Area(㎡) | 0.57 | 1.04 | 2.28 | 3 | 4 | 4 | 4.86 |
| Rush times（min） | 80~180 | 50~125 |
| Feeding size (mm) | ＜6 | ＜10 | ＜10 | ＜10 | ＜25 | ＜25 | ＜10 |
| Make-up water volume under the screen (m³ / t) | 1~2 | 2~3 | 2~4 | 3~6 | 4~8 | 4~8 | 3~6 |
| Makeup water pressure/mpa | ≥0.05 |
| Processing capacity (t / h) | 1.5~3 | 2.5~5 | 5~10 | 7.5~15 | 8~20 | 8~20 | 12~25 |
| Motor power (kw) | 1.5 | 2.2 | 3 | 5.5 | 7.5 | 4x2 | 7.2 |
| Dimensions (mm) | 1550×780×1530 | 2270×1110×1890 | 3225×1550×2050 | 2745×2000×3030 | 4240×1990×2750 | 4240×1990×2750 | 3600×2000×2600 |
| Weight (kg) | 610 | 900 | 1640 | 3085 | 3098 | 3500 | 4500 |
| Remarks | | | | Large particle jig | Large particle jig | Large particle jig double drive | |
Our business scopes as below:
Jumbo Underground Drill Rig
DTH Drilling Rig
Anchor Drilling Rig
Jet Grouting Rig
Water Well Drilling Rig
Pile Drilling Rig
Percussion Drilling Rig
Horizontal Directional Drilling Rig
Core Drilling Rig
Rotary Drilling Rig
Ore Processing Equipment
Oil And Gas Drilling Rig
Air Compressor
Mud Pump
Drilling Components Accessories
Contact Now
