Purpose of YKP-50 Drilling Rig ：
It is widely used in bridge foundation, well drilling, building engineering, hydrologic exploration and other foundation construction, and has good drilling effect on sand layer, pebble, sedimentary rock and other strata.
1.Percussion Drilling Rig is mainly used in deep foundation engineering (tall building engineering, water conservancy project, bridge construction) construction of large caliber cast-in place pile and construction of diaphragm wall and deep water well. It can adapt to various geological conditions, especially to pebble bed and rock stratum. Percussion drilling rig is more applicable than the other kinds of drilling machines with high efficiency and long durable.
2.The drill bit of Percussion drilling rig can break rock into pieces and then use the slag exhausting equipment to clean the slag out of the hole. The drill bit can drive the soil, sand, pebble and etc into around of the hole, no need to exhaust them out of the holes, improve the working efficiency. Meanwhile, the formed hole wall is high dense and strong, which is very useful for stabilizing the hold wall and improving the carrying capacity of the pile foundation
3.Percussion drilling rig is very popular in the market currently, all of its components are all installed in the trailer, like electric motor, hoist, mast etc, integrate motion. The percussion drilling rig uses the crank-link mechanism to change the power's gyration motion into alternating motion, through the steel cable to drive the drill bit to do up-and-down motion
Technical parameter
| Technical Parameter for YKP-90 Percussion Drilling Rig |
| Model | YKP-90 |
| Drill diameter | 800-1500mm | 1500-1800mm | 1800-2000mm | 2100-2500mm |
| Drilling depth | 300-150m | 150-100m | 100m-80m | 80-70m |
| Lifting force | 80KN |
| Mast Loading Capacity | 50T |
| Impact Times | 35-38 times |
| Mast Height | 8.5-12m(standard 8.5m) |
| Rated weight of drill tool | 6500kgs |
| Stroke | 500-1100cm |
| Engine Power | 75KW |
| Technical Parameter for YKP-50 Percussion Drilling Rig |
| Model | YKP-50 |
| Drill diameter | 600-1000mm | 1000-1800mm | 1800-2000mm |
|
| Max. Drilling depth | 260m | 150m | 60m |
|
| Lifting force | 50KN |
| Mast Loading Capacity | 25T |
| Impact Times | 36-40 times |
| Mast Height | 8-12m |
| Rated weight of drill tool | 4200kgs |
| Stroke | 500-1100cm |
| Engine Power | 55KW |
| Technical Parameter for YKP-60 Percussion Drilling Rig |
| Model | YKP--60 |
| Drill diameter | 600-1000mm | 1000-1600mm | 1600-2000mm |
|
| Max. Drilling depth | 300m | 100m | 70m |
|
| Lifting force | 60KN |
| Mast Loading Capacity | 30T |
| Impact Times | 36-38 times |
| Mast Height | 8-12m |
| Rated weight of drill tool | 4000kgs |
| Stroke | 500-1000cm |
| Engine Power | 55KW |
| Technical Parameter for YKP-80 Percussion Drilling Rig |
| Model | YKP--80 |
| Drill diameter | 800-1500mm | 1500-1800mm | 1800-2000mm | 2100-2500mm |
| Drilling depth | 300-150m | 150-100m | 100m-80m | 80-60m |
| Lifting force | 75KN |
| Mast Loading Capacity | 45T |
| Impact Times | 36-38 times |
| Mast Height | 8.5-12m(standard 8.5m) |
| Rated weight of drill tool | 5800kgs |
| Stroke | 500-1100cm |
| Engine Power | 75KW |
Our business scopes as below:
Jumbo Underground Drill Rig
DTH Drilling Rig
Anchor Drilling Rig
Jet Grouting Rig
Water Well Drilling Rig
Pile Drilling Rig
Percussion Drilling Rig
Horizontal Directional Drilling Rig
Core Drilling Rig
Rotary Drilling Rig
Ore Processing Equipment
Oil And Gas Drilling Rig
Air Compressor
Mud Pump
Drilling Components Accessories
Contact Now
